Heavy Duty Solvent Free Epoxy Coal Tar Anti Corrosion Paint for Pipe or Tank

Detailed Product Description Heavy-duty Solvent-Free Epoxy Coal-tar Anticorrosion Pipeline Coating Product Description • A two pack solvent epoxy coal-tar heavy-duty anti-corrosive coating and it is characterized by excellent resistance to chemicals, water and corrosion. • VOC less than 50g/L...

Product details

Detailed Product Description

Place Of Origin:Xiamen, China (Mainland)Main Raw Material:Solvent-Free Epoxy Coal-tar
State:Liquid CoatingApplication Method:Spray
Rons/coat Academic Spreading Rate:900 Microns Dry ( 950 Microns Wet)Standard Film Thickness:Dry:150microns/coat
Color:Black And BrownShelf Life:1 Year


Heavy-duty Solvent-Free Epoxy Coal-tar Anticorrosion Pipeline Coating
Product Description

• A two pack solvent epoxy coal-tar heavy-duty anti-corrosive coating and it is characterized by excellent resistance to chemicals, water and corrosion.
• VOC less than 50g/L

Intended Uses
• For inner and outside of concrete pipe heavy-duty anticorrosion.

Product Information
• Volume Solids 95%±2%
• Finish/Sheen Semi-Gloss
• Typical Film Thickness 900 microns dry ( 950 microns wet)
• Theoretical Coverage: 1.05㎡/L at typical film thickness
• Mix Ratio: 1:1(Volume) 1:1 (mass)
• Method of Application
   Airless Spray Tip size range 0.45-0.68mm
   Output pressure ≥17mpa
   Brush/Roller For small area only
• Thinner: Not recommended.
• Drying Information
   -5°C 5°C 25°C 35°C
   Touch Dry 6H 4H 2H 1H
   Hard Dry 36H 24H 18H 12H
   Pot Life 2H 1H 30min 20min
   Overcoatings Data:  Substrate Temperature
   Overcoated By
   -5°C 5°C 25°C 35°C
   Min Max Min Max Min Max Min Max
   725-H53-102 24H 14D 20H 10D 8H 7D 6 H 5D
• Storage: Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.
   Shelf Life: 12Months minimum at 25°C.Subject to re-inspection thereafter.
• Pack Size:
   Park A 25KG/18L in 20L container
   Park B 25KG/18L in 20L container.
• Flash Point:
   Park A Greater than 31°C
   Park B Greater than 31°
   Mixed paint Greater than 31°

Surface Preparation:
Remove loose powder of the cement, attached organisms, mud, oil or grease and other foreign matter thoroughly

Limitations
• Apply in good weather. Temperature of the surface to be coated must be least 3°C above the dew point when the is lower than 85%
• In common with all epoxy base coatings, this product will exhibit chalking of the film on UV exposure.
• The dry time and over coating interval may change according to the environment factors.
• Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.

Related Products
Feedback

Our Service

The company has been developed a series of ship coating products have been passed approval by CCS, LR, and DNV. The coatings systems hold independent intellectual property rights meet the requirements of corrosion on steel and concrete structures in harbors, wharfs, bridges, power stations, petrol-chemicals and civil engineering.

Feedback

Contact Us

Address:Room 214 2F No.149-2 Huangpu AVE Middle, TianHe District, Guangzhou City, China

Tel: +86-20-38993165

Fax: 86-20-38993165

E-mail: sales@huisinschem.com

CopyRight© Huisins New Material Technology Co.,Limited

Huisins New Material Technology Co.,Limited