Metallic Paint

Metallic Paint

High build epoxy intermediate coating-Grey/White

Chat Now
Product details

Product Description:

--Model: 725-H53-105

--A two pack free solvent epoxy coal-tar heavy-duty anticorrosive coating and it is characterized by good adhesion and excellent resistance to  chemicals, water and corrosion.

--VOC less than 50g/L.

Intended Uses:

--For inner and outside of concrete pipe heavy-duty anticorrosion.

Product Information:

Volume Solids:50%±3%                  Finish/Sheen:  Gloss

Film Thickness(μm)

Min

Typical

Max

Dryfilm Thickness

200

900

1100

Wetfilm Thickness

200

950

1100

Theoretical Coverage(m2/L)

4.7

10.5

0.86

Mix Ratio: 1:1(volume)1:1(weight)

Method of Application

 

Airless Spray

Recommended Preheat 40℃-70℃

Tip size range:0.53-0.89mm

Output pressure:≥22MPa

Air Spray 

Not recommended

Brush/Roller

For small  area only

Thinner

Not recommended. Use only in exceptional circumstances  (volume 5%).

Cleaner

HX-501

Induction Period

Not necessary

 Drying Information:


-5

 5

25

35

Touch Dry

6h

4h

2h

1.5min

Hard Dry

24h

20h

8h

6h

Pot Life

2h

1h

30min

20min

Overcoating Data: 

 

Substrate Temperature

 

-5℃

 5℃

25℃

35℃

Overcoated by

Min Max

Min Max

Min Max

Min Max

 

24h 14d

20h 10d

8h 7d

6h 5d

725-H53-105

48h

24h

18h

12h

Storage:

Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months

minimum at 25℃,Subject to re-inspection thereafter.

Pack Size:

Part A: 27kg/18L in 20 L container

Part B: 27kg/18L in 20L container

Flash Point:

Part A: Greater than 31℃

Part B: Greater than 31℃

Mixed pant: Greater than 31℃

Surface Preparation:

All surfaces to be coated should be clean, dry and free from contamination.

★Concrete

Remove loose powder of the cement, attached organisms, mud, oil or grease

and other foreign matter thoroughly.

The surface can be abrade by blasting or using power tool to remove loose

powder, attached organisms, mud etc.

Limitations:

1)   Apply in good weather. Temperature of the surface to be coated must be least 3℃above the dew point when the humidity is lower than 85%.

2)  In common with all epoxy base coatings, 725-H53-105 will exhibit chalking of the firm on UV exposure.

3)  The dry time and overcoating interval may change according to the environment factors.

4)   Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.

Duty statement:

●The data in the sheet base on the information from the laboratory and practice.

●The application may exceed the control, so we only ensure our product quality.

●We own the right of the data sheet modification without informing.

 


Hot Tags: Metallic Paint, China, suppliers, manufacturers, factory, Asia, Africa, made in China
Related Products
Feedback

Our Service

The company has been developed a series of ship coating products have been passed approval by CCS, LR, and DNV. The coatings systems hold independent intellectual property rights meet the requirements of corrosion on steel and concrete structures in harbors, wharfs, bridges, power stations, petrol-chemicals and civil engineering.

Feedback

Contact Us

Address:Room 603 6F No 140 Huagang Business Building Zhongshan AVE West, TianHe District, Guangzhou City, China

Tel: +86-20-38993165

Fax: 86-20-38993165

E-mail: sales@huisinschem.com

CopyRight© Huisins New Material Technology Co.,Limited