Polyaspartic Coating

Polyaspartic Coating

PA6475 is consist of aspartate resin and isocyanate, 3-component paint with white corundum sand added.

Product details

Polyaspartic Coating


Product introduction

Characteristic

High solids

Low toxicity and environmental protection

Excellent weather resistance,

Semi-matt, high surface hardness

Anti-scratch wear resistance.

 

Application: Mainly used in parking lot, commercial decoration and office floor, especially suitable for wear-resistant scratch-resistant high requirements and security of light color occasions, can also be used in outdoor direct sunlight occasions.

 


Material basis data (25 , 60% RH) Specification

Component A

 

Color:      Optional

Solid content by weight:100%

Viscosity:      1200MPS(25℃,A,B Dcomponents combined)

Density:      1.1g/cm3

Gloss:      Semi-gloss

 

Component B

 

Color:      Light yellow liquid

Solid content by weight:100%

Viscosity:      120MPS(25℃,A,B Dcomponents combined)

Odor:      Slight

 

Mixed material data (25 ° C, 60% RH)

Mixing viscosity:   450MPS

Mixed weight (without aggregate): 1.05

Mixed solid (with aggregate):90%

Potlife: 20Min

Table dry time: 1-2hrs

Walking time: 6-8hrs

Heavy objects opening hours: 48hrs

 

Cured material properties

 

Film appearance: Semi-matte light non-slip surface

Hardness on 7days: 4H

Wear (CS17 round 750g, 500 rpm): 15mg

Impact resistance (500g, 1m) : pass

Actual value:Related to surface treatment,external environment,application method and other factors.

 

 


Application paramether

ratio: 

Airless spray:A:B:D thinner=(100:20:47)

Working time: 

Temperature(℃)

25

30

Working time(hrs)

20min

15min

 

 

 

Condition:

Environment temperature: -15℃-30℃, Environment moisture:≤85%

Substrate temperature: 3℃ higher than air dew pint        

Application method:

Airless sprayair spraybrush and roller applying

Airless spraytwo components

recommendation

Nozzle size

0.190.23

Pressure

100120kg.cm3

Thinner:Standard Polyaspartic thinner

note:Construction is forbidden when humidity is more than 85% RH;

Curing agent components easily metamorphic with water vapor, be sure to seal dry.

 

Drying time and application interval:

temperature

5

5

10

20

30

Touch dry

4

3

2

1.5

1

Tack free

24

12

10

8

6

interval

24

12

10

8

6

   

Above data just for your reference, the actual drying time depends on film thickness, ventilation, humidity, primer, mechanical strength etc.

Use guide

1.Materials must be mixed after all poured to the ground, and then scratch, so as to avoid sinking the bottom of the aggregate, resulting in poor surface effect;

2.Scratch after using the first roll construction method, short hair or sponge drum received uniform;

3.Strict control of the amount of 0.08 ~ 0.1kg / m2, to avoid accumulation, or foaming serious;

4.The material requirements of the construction is very high, before using our company must be professional training before operation.

 

Storage

Shelf life: Component A:1 year  Component B( isocyanate):1 year

Storage temperature: 0℃-30℃

package

Component A:3kg Component B:0KG 

Safety measures

l  Avoid all skin and eye contact

l  In case of skin contact,flush with enough water. In case of eye contact,flush with plenty of water and get medical aid immeidately

l  Keep great ventilation

l  Coating may contains flammable matter. Keep away from spark and smoking around is forbidden.

l  Comply with all health&security regulation in site.

 

 

Hot Tags: polyaspartic coating, China, suppliers, manufacturers, factory, Asia, Africa, made in China
Related Products
Feedback

Our Service

The company has been developed a series of ship coating products have been passed approval by CCS, LR, and DNV. The coatings systems hold independent intellectual property rights meet the requirements of corrosion on steel and concrete structures in harbors, wharfs, bridges, power stations, petrol-chemicals and civil engineering.

Feedback

Contact Us

Address:Room 603 6F No 140 Huagang Business Building Zhongshan AVE West, TianHe District, Guangzhou City, China

Tel: +86-20-38993165

Fax: 86-20-38993165

E-mail: sales@huisinschem.com

CopyRight© Huisins New Material Technology Co.,Limited