A One Pack of Grey Colors Boat Bottom Paint Fouling Release Coatings Tie Paint 50μm Dry for Industrial Ship Metal Surface

Detailed Product Description A One Pack Of Grey Boat Bottom Paint Tie Paint 50μm Dry For Ship Bottom Surface Product Description • A one pack tie paint • VOC less than 450g/L Intended Uses • Tie coat between anticorrosive and antifoulings • For use at Newbuilding-or Maintenance and Reair....

Product details

Detailed Product Description

Main Raw Material:EpoxyStandard Film Thickness:50μm Dry (105μm Wet)
Application Method:SprayColor:Multicolor
Type:Tie Coating Between Anticorrosive And AntifoulingsLuster:Half Glazed
Theoretical Spreading Rate:200Solids (vol %):≤390g/L


A One Pack Of Grey Boat Bottom Paint Tie Paint 50μm Dry For Ship Bottom Surface
Product Description

• A one pack tie paint
• VOC less than 450g/L

Intended Uses
• Tie coat between anticorrosive and antifoulings
• For use at Newbuilding-or Maintenance and Reair.

Product Information
• Volume Solids 48%±2%
• Finish/Sheen Matt
• Typical Film Thickness 50μm dry ( 105μm wet)
• Theoretical Coverage 9.5㎡/lat typical film thickness
• Mix Ratio: one pack
• Method of Application
   Airless Spray Tip size range 0.38-0.53mm
   Output pressure ≥17mpa
   Brush/Roller For small area only
• Thinner: Not recommended. Use water only in exceptional circumstances(Max5% by volume)
• Drying Information 
   -5°C 5°C 25°C 35°C
   Touch Dry 2H 1H 30min 15min
   Hard Dry 24H 20H 12H 8H
   Pot Life Not applicable
   Overcoatings Data: Substrate Temperature
   Overcoated By 
   5°C 15°C 25°C 35°C
   Min Max Min Max Min Max Min Max
   24H no 20H no 12H no 8H no
• Storage: Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.Store temperature should be higher than 0°C.
   Shelf Life: 12Months minimum at 25°C.Subject to re-inspection thereafter.
• Pack Size: 24.7KG/18L in 20L container
• Flash Point: Greater than 28°C

Limitations
• Apply in good weather. Temperature of the surface to be coated must be least 3°C above the dew point when the is lower than 85%
• In common with all epoxy base coatings, this product will exhibit chalking of the film on UV exposure.
• The dry time and over coating interval may change according to the environment factors.
• Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.

12-1.jpg


Related Products
Feedback

Our Service

The company has been developed a series of ship coating products have been passed approval by CCS, LR, and DNV. The coatings systems hold independent intellectual property rights meet the requirements of corrosion on steel and concrete structures in harbors, wharfs, bridges, power stations, petrol-chemicals and civil engineering.

Feedback

Contact Us

Address:Room 214 2F No.149-2 Huangpu AVE Middle, TianHe District, Guangzhou City, China

Tel: +86-20-38993165

Fax: 86-20-38993165

E-mail: sales@huisinschem.com

CopyRight© Huisins New Material Technology Co.,Limited

Huisins New Material Technology Co.,Limited