Potable Water Tank Coating Epoxy Polyamide Food Container Interior Paint

Detailed Product Description Potable water tank coatings- white/pink Product Description 1. A two pack drinking water tank epoxy coatings 2. A high solids, epoxy phenolic coatings 3. VOC less than 300g/L Intended Uses • For use in drinking water tank anticorrosive • For use at Newbuilding-or...

Product details

Detailed Product Description

Main Raw Material:EpoxyStandard Film Thickness:125μm Dry ( 180μm Wet)
Application Method:SprayColor:Multicolor
Type:TopcoatLuster:Half Glazed
Theoretical Spreading Rate:200Solids (vol %):≤300g/L


Potable water tank coatings- white/pink
Product Description

1. A two pack drinking water tank epoxy coatings
2. A high solids, epoxy phenolic coatings
3. VOC less than 300g/L

Intended Uses
• For use in drinking water tank anticorrosive
• For use at Newbuilding-or Maintenance and Repair.

Product Information
• Volume Solids 70%±2%
• Finish/Sheen Gloss
• Typical Film Thickness 125μm dry (180μm wet)
• Theoretical Coverage 5.5㎡/lat typical film thickness
• Mix Ratio: 2:1:1(Volume) 4:1(mass)
• Method of Application
   Airless Spray Tip size range 0.38-0.53mm
   Output pressure ≥17mpa
   Brush/Roller For small area only
• Thinner: Not recommended. Use water only in exceptional circumstances(Max5% by volume)
• Drying Information 
   5°C 15°C 25°C 35°C
   Touch Dry 4H 3H 2H 1H
   Hard Dry 48H 36H 20H 10H
   Pot Life 4H 3H 2H 1H
   Overcoatings Data: Substrate Temperature
   Overcoated By
   5°C 15°C 25°C 35°C
   Min Max Min Max Min Max Min Max
   48H 14D 36H 10D 20H 7D 10H 5D
• Storage:Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.
   Shelf Life: 12Months minimum at 25°C.Subject to re-inspection thereafter.
• Pack Size:
   Park A 24KG/13.5L in 20L container
   Park B 6KG/6.5L in 9.25L container.
• Flash Point:
   Park A greater than 31°C
   Park B greater than 29°C
   Mixed paint greater than 31°C

Limitations
• Apply in good weather. Temperature of the surface to be coated must be least 3°C above the dew point when the is lower than 85%
• In common with all epoxy base coatings, this product will exhibit chalking of the film on UV exposure.
• The dry time and over coating interval may change according to the environment factors.
• Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.


Related Products
Feedback

Our Service

The company has been developed a series of ship coating products have been passed approval by CCS, LR, and DNV. The coatings systems hold independent intellectual property rights meet the requirements of corrosion on steel and concrete structures in harbors, wharfs, bridges, power stations, petrol-chemicals and civil engineering.

Feedback

Contact Us

Address:Room 214 2F No.149-2 Huangpu AVE Middle, TianHe District, Guangzhou City, China

Tel: 86-20-38993165

Fax: 86-20-38993165

E-mail: sales@huisinschem.com

CopyRight© Huisins New Material Technology Co.,Limited

Huisins New Material Technology Co.,Limited