Alkyd Deck Coating

Alkyd Deck Coating

Alkyd deck paint-Multicolor

Chat Now
Product details

Product Description:

--- Model: 725-C42-1

---A quick drying single pack alkyd deck paint

---VOC less than 420g/L


Intended Uses:

-A cosmetic finish.

-For use in all above water areas.

-For use in all above water areas.

-For use at Newbuilding, Maintenance and Repair or On Board Maintenance.


Product Information



Drying Information



Overcoating Data



Storage:

Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months

minimum at 25℃,Subject to re-inspection thereafter.


Pack Size:22kg/18L in 20 L container.


Flash Point:Greater than 28℃.


Systems and Compatibility:

Consult your Sunrui Representative for the systems best suited for the surfaces to be protected.


Surface Preparation:

High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. All surfaces to be coated should be clean, dry and free from contamination.


Newbuilding/Major Refurbishment:

725-C42-1 should be applied over a recommended primer coating scheme. The primer surface should be clean, dry and free from contamination.

725-C42-1 must be applied within the coating interval specified (consult the relevant product data sheet). Areas of breakdown, damage etc. should be prepared to the specified standard (eg.St3) and primed prior to the application of 725-C42-1.


Repair/On Board Maintenance:

1)725-C42-1 should be applied over a recommended primer coating scheme. The  primer  surface  should  be  clean,  dry  and  free  from  contamination.

2)725-C42-1 must be applied within the coating interval specified (consult the relevant product data sheet). Areas of breakdown, damage etc. should be prepared to the specified standard (eg. St3) and primed prior to the application of 725-C42-1.

3)725-C42-1 may be applied directly over aged 725-C42-1 following thorough fresh water washing and degreasing provided the coating to be overcoated is in an intact and tightly adherent condition. Loose or flaking coatings should be removed back to a firm edge and 725-C42-1 or an appropriate primer should be used to repair the area before application of the full coat.


Limitations:

1)Apply in good weather. Temperature of the surface to be coated must be least 3℃above the dew point when the humidity is lower than 85%.

2)The dry time and overcoating interval may change according to the environment factors.

3)Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.




Hot Tags: alkyd deck coating, China, suppliers, manufacturers, factory, Asia, Africa, made in China
Related Products
Feedback

Our Service

The company has been developed a series of ship coating products have been passed approval by CCS, LR, and DNV. The coatings systems hold independent intellectual property rights meet the requirements of corrosion on steel and concrete structures in harbors, wharfs, bridges, power stations, petrol-chemicals and civil engineering.

Feedback

Contact Us

Address:Room 603 6F No 140 Huagang Business Building Zhongshan AVE West, TianHe District, Guangzhou City, China

Tel: +86-20-38993165

Fax: 86-20-38993165

E-mail: sales@huisinschem.com

CopyRight© Huisins New Material Technology Co.,Limited