Non-skid Epoxy Deck Paint Multicolor Spray Topcoat Marine Coatings

Detailed Product Description Epoxy deck paint-Multicolor Marine Spray Paint Product Description 1.A hard wearing two pack epoxy deck paint 2.VOC less than 400g/L Intended Uses 1.A tough cosmetic finish 2.For use at decks and deck fittings. 3.For use at Newbuilding-or Maintenance and Reair....

Product details

Detailed Product Description

Main Raw Material:EpoxyStandard Film Thickness:40 Microns Dry (75 Microns Wet)
Application Method:SprayColor:Multicolor
Type:TopcoatLuster:Half Glazed
Theoretical Spreading Rate:200Solids (vol %):≤400g/L


Epoxy deck paint-Multicolor Marine Spray Paint
Product Description

1.A hard wearing two pack epoxy deck paint
2.VOC less than 400g/L

Intended Uses
1.A tough cosmetic finish
2.For use at decks and deck fittings.
3.For use at Newbuilding-or Maintenance and Reair.

Product Information
1.Volume Solids 53%±3%
2.Finish/Sheen Semi-Gloss
3.Typical Film Thickness 40 microns dry ( 75 microns wet)
4.Theoretical Coverage 9.5㎡/lat typical film thickness
5.Mix Ratio: 2:1:1(Volume) 4:1(mass)
6.Method of Application
   Airless Spray Tip size range 0.38-0.53mm
   Output pressure ≥17mpa
   Brush/Roller For small area only
7.Thinner: Not recommended. Use water only in exceptional circumstances(Max5% by volume)
8.Induction Period
   10°C 25°C 35°C
   30min 20min 10min
9.Drying Information
   10°C 25°C 35°C
   Touch Dry 6H 2H 1H
   Hard Dry 48H 20H 16H
   Pot Life 6H 4H 2H
   Overcoatings Data: Substrate Temperature
   Overcoated By
   5°C 15°C 25°C 35°C
   Min Max Min Max Min Max Min Max
   24H no 20H no 12H no 8H no
10.Storage: Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.Store temperature should be higher than 0°C.
     Shelf Life: 12Months minimum at 25°C.Subject to re-inspection thereafter.
11.Pack Size:
     Park A 22.8KG/14L in 20L container
     Park B 5.7KG/6L in 9.25L container.
12.Flash Point:
     Park A greater than 31°C
     Park B greater than 31°C
     Mixed paint greater than 31°C

Limitations
1.Apply in good weather. Temperature of the surface to be coated must be least 3°C above the dew point when the is lower than 85%
2.In common with all epoxy base coatings, this product will exhibit chalking of the film on UV exposure.
3.The dry time and over coating interval may change according to the environment factors.
4.Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.

30-1.jpg


Related Products
Feedback

Our Service

The company has been developed a series of ship coating products have been passed approval by CCS, LR, and DNV. The coatings systems hold independent intellectual property rights meet the requirements of corrosion on steel and concrete structures in harbors, wharfs, bridges, power stations, petrol-chemicals and civil engineering.

Feedback

Contact Us

Address:Room 214 2F No.149-2 Huangpu AVE Middle, TianHe District, Guangzhou City, China

Tel: +86-20-38993165

Fax: 86-20-38993165

E-mail: sales@huisinschem.com

CopyRight© Huisins New Material Technology Co.,Limited

Huisins New Material Technology Co.,Limited